What the D108 Panel Brings to Your Sim
The D108 All-in-One A320 Home Cockpit Panel combines the FCU (Flight Control Unit), left-side EFIS (Electronic Flight Instrument System), and ECAM/Gear/Auto-Brake warnings into a single streamlined unit. This integration simplifies your home cockpit setup by reducing cable clutter and providing dedicated hardware controls for the most-used A320 functions.
Designed for Windows-based flight simulators, the D108 supports MSFS 2020/2024 (with FenixA320 and FBWA320) and X-Plane 12 (with TolissA320). The panel ships with two 3-meter Type-C cables—one for power, one for data—giving you flexibility in desktop placement.
Panel Specifications That Matter for Setup
- D108 All-in-One A320 Home Cockpit Panel - Integrated FCU+Left EFIS+ECAM/Gear/Auto-Brake Warnings for Windows MSFS2020, X-Plane 12 (Fenix, FBW, Toliss)Pre-sale: 15 days: Measures 59 cm long, 10 cm thick, and 10 cm high. The 59 cm length requires a stable desktop or mounting surface; measure your available space before installation.

D108 All-in-One A320 Home Cockpit Panel - Integrated FCU+Left EFIS+ECAM/Gear/Auto-Brake Warnings for Windows MSFS2020, X-Plane 12 (Fenix, FBW, Toliss)Pre-sale: 15 days - D108 All-in-One A320 Home Cockpit Panel - Integrated FCU+Left EFIS+ECAM/Gear/Auto-Brake Warnings for Windows MSFS2020, X-Plane 12 (Fenix, FBW, Toliss)Pre-sale: 15 days: Ships with two 3 m Type-C cables—one for power and one for data. The separate power and data cables ensure reliable operation; the 3 m length allows routing behind a desk or mounting frame.
- D108 All-in-One A320 Home Cockpit Panel - Integrated FCU+Left EFIS+ECAM/Gear/Auto-Brake Warnings for Windows MSFS2020, X-Plane 12 (Fenix, FBW, Toliss)Pre-sale: 15 days: Features 2.5 mm push/pull travel and smooth encoder rotation. The tactile feedback of the knobs and switches mimics real A320 controls, making adjustments during flight feel more natural.
Setting Up the D108 Panel for MSFS2020
Follow these steps to get the D108 panel operational with MSFS2020. The process is similar for X-Plane 12 with TolissA320.
- Connect the panel to your PC: Use the included Type-C cables: connect one to a USB power source (such as a powered hub or wall adapter) and the other to a USB data port on your Windows PC. The panel does not require external drivers for basic HID recognition.
- Launch your simulator and load an A320: Start MSFS2020 and select the FenixA320 or FBWA320. The D108 panel should be automatically detected as a USB HID device. No additional configuration is needed for the FCU and EFIS controls to map to the default A320 bindings.
- Verify control response: Rotate the FCU knobs (speed, heading, altitude, vertical speed) and observe the corresponding changes in the simulator's PFD and ND. Press the EFIS buttons to toggle display modes. The ECAM and gear/auto-brake warnings should illuminate appropriately during system tests.
- Adjust placement if needed: The panel's 59 cm length and 10 cm height may require repositioning your monitor or mounting the panel on a desk clamp or shelf. Ensure the cables are not strained and that the panel sits level for comfortable reach.
What to Consider Before You Mount It
The D108 panel is a single rigid unit—unlike modular setups where you can position FCU and EFIS separately. Make sure your desk or cockpit frame has sufficient clear width as specified in the product instructions. The rear shell is high-precision 3D-printed, which gives it a distinct texture; if you prefer a smooth injection-molded finish, note this before purchase.
The panel is compatible only with Windows simulators (MSFS2020/2024 and X-Plane 12). It does not support macOS or Linux. For the best experience, use a powered USB hub if your PC's USB ports cannot supply sufficient current for both power and data cables.
Troubleshooting Common Setup Issues
If the panel is not recognized by the simulator, first check that both Type-C cables are firmly connected and that the data cable is plugged into a USB port that supports data transfer (not a charge-only port). Restart the simulator after connecting the panel. If controls still do not respond, try a different USB port or a powered hub.
For X-Plane 12 with TolissA320, the panel maps to the default A320 commands. If certain knobs do not respond, verify that you are using the latest version of the Toliss A320 and that no other controller is overriding the same axis.

