How to Set Up the TRIMUI SMART PRO Magnetic Charging Base
By LITNXT | Top Retro Handheld Game Console – litnxt | Published: 2026-11-04
Category: Návody
A step-by-step guide to setting up the 3D printed magnetic charging base for your TRIMUI SMART PRO or SMART PRO S, including placement, cable routing, and common mistakes to avoid.
Quick answer
Place the 3D printed magnetic charging base on a flat, stable surface near a power source, connect the charging cable to the base, and align your TRIMUI SMART PRO or SMART PRO S with the magnetic contacts. The magnets will guide the console into the correct charging position.
Why a dedicated charging base makes sense
A charging base keeps your handheld in a consistent, upright position, which reduces strain on the charging port and makes it easier to grab and go. The magnetic alignment removes the guesswork from connecting the cable, especially in low light or when you are in a hurry.
Because this base is 3D printed with semi-matte PLA, it is lightweight and should be treated as a stationary dock rather than a travel accessory. It is designed for desk or nightstand use, not for tossing in a bag.
What to check before you start
Confirm you have the correct model: the base fits both the TRIMUI SMART PRO and the TRIMUI SMART PRO S, but not other handhelds. Also check that your charging cable and power adapter are compatible with your console’s charging requirements; the base does not include a power supply.
The base supports use with a handle, so if you already use a grip or handle on your console, you can leave it attached. However, make sure the handle does not interfere with the magnetic connection or block the charging contacts.
Step-by-step setup
- Unbox and inspect the base: Remove the 3D printed base from its packaging and check for any loose print residue or sharp edges. Wipe it with a dry cloth if needed. Do not use water or cleaning solvents, as they may damage the PLA material.
- Choose a stable location: Place the base on a flat, level surface close to a power outlet, such as a desk or nightstand. Ensure the surface is clean and dry. Avoid placing it on soft or uneven surfaces where it could tip over.
- Connect the charging cable: Plug your compatible charging cable into the base’s charging port. The base does not come with a cable or power adapter, so use the one that came with your console or a certified equivalent. Check that the cable is fully inserted and not under tension.
- Seat the console on the base: Lower your TRIMUI SMART PRO or SMART PRO S onto the base. The magnets will pull the console into alignment; you should feel it settle into place. Do not force the console; if it does not align easily, lift it and try again.
- Verify charging: Check that the console’s charging indicator lights up or the screen shows a charging status. If not, lift the console and reseat it to ensure the contacts are clean and aligned. If charging still does not start, try a different cable or power source before assuming the base is faulty.
- Use with a handle (optional): If you use a grip or handle on your console, you can leave it attached. Make sure the handle does not press against the base or lift the console off the magnetic contacts. Test the fit by gently rocking the console; it should stay firmly seated.
Product facts
- 3D Printed Magnetic Charging Base for TRIMUI SMART PRO/TRIMUI SMART PRO S Game Consoles: Suitable for TRIMUI SMART PRO and TRIMUI SMART PRO S, with magnetic charging and precise positioning. You get a secure, aligned connection every time, and the same base works if you own both models.
3D Printed Magnetic Charging Base for TRIMUI SMART PRO/TRIMUI SMART PRO S Game Consoles - 3D Printed Magnetic Charging Base for TRIMUI SMART PRO/TRIMUI SMART PRO S Game Consoles: FDM 3D printed in semi-matte PLA as a one-piece base. It is lightweight and has a matte finish that resists fingerprints, but it is not designed for rough handling or outdoor use.
- 3D Printed Magnetic Charging Base for TRIMUI SMART PRO/TRIMUI SMART PRO S Game Consoles: Delivery is arranged within 7–10 days. Plan ahead if you need the base for a specific date, as it is made to order.
