Start with the right case for the RG35XX Plus
A silicone case only helps if it is made for your exact handheld. The Anbernic RG35XX Plus Silicone Protective Case is designed exclusively for the RG35XX Plus, so the button openings and edges line up with that console rather than a similar-looking model.
Before you order, check the model name on your device and choose a color. This case comes in White, Black, and Blue. It weighs 50g and measures 8.3 x 11.9 x 2.1cm, so it adds a light layer rather than turning the handheld into a bulky brick.
What the case is made to do
- Anbernic RG35XX Plus Silicone Protective Case: Designed exclusively for the RG35XX Plus Retro Handheld Game Console for a snug and secure fit. A model-specific fit keeps the silicone from shifting over the screen or buttons during play.
Anbernic RG35XX Plus Silicone Protective Case - Anbernic RG35XX Plus Silicone Protective Case: Crafted from premium silicone for protection against drops, scratches, and dust. Silicone cushions everyday knocks and keeps grit off the shell without a hard-case bulk.
- Anbernic RG35XX Plus Silicone Protective Case: Shockproof and anti-slip texture for a firm grip. The textured surface is the main reason to use this case during long handheld sessions.
- Anbernic RG35XX Plus Silicone Protective Case: Lightweight and flexible silicone that is easy to install and remove. You can take the case off for cleaning or storage without fighting a rigid shell.
How to fit the silicone case without stretching it
The supplied information confirms the case is flexible and easy to install, but it does not include a step-by-step fitting procedure. Use the checks below as a practical routine, and stop if the silicone feels like it is being forced.
- Power off and clear the console: Turn the RG35XX Plus off and wipe loose dust from the shell so grit does not get trapped under the silicone.
- Line up the screen opening first: The case is made exclusively for the RG35XX Plus, so the screen cutout should sit square before you press the edges down.
- Ease the edges over the shell: Work around the case a little at a time. Flexible silicone should stretch gently; if one corner pulls the screen opening off-center, lift and reset it.
- Check the buttons and ports: Press each button through the case and confirm the openings sit flat. The supplied information does not list port or button cutout details, so inspect your own unit rather than assuming.
- Let the silicone settle: Silicone can sit slightly proud right after fitting. Give it a few minutes and re-seat any edge that has rolled under.
Grip tips for longer play sessions
The anti-slip texture does most of the work, but small habits keep the RG35XX Plus steady in your hands.
- Keep your palms dry: Wipe your hands before play. Moisture on silicone reduces the anti-slip benefit and leaves marks on the surface.
- Hold the textured sides, not the screen bezel: Grip the case where the anti-slip texture sits so your thumbs stay free for the controls.
- Set the console down on the case, not the screen: The silicone protects against scratches and dust, but it is not a stand. Place the handheld face-up or in a pouch when you pause.
- Remove the case if it shifts during play: A case that slides is worse than no case. Re-fit it or check that the correct model was ordered.
White, Black, or Blue: what changes
Color is the only listed option, so choose based on how you use the handheld rather than expecting different protection.
- White: Bright and minimal, but light-colored silicone shows dust and hand marks sooner, so plan on more frequent wiping.
- Black: The most forgiving color for everyday marks and the safest match for a dark console.
- Blue: The catalog describes a sleek blue aesthetic; it adds color without changing the fit or the 50g weight.
How to clean a silicone handheld case
The supplied record does not include a manufacturer cleaning method, so keep the routine mild and avoid soaking the console. Remove the case first so moisture never reaches the handheld.
- Take the case off the console: The flexible silicone is designed to be easy to remove, so clean it separately rather than wiping around the buttons.
- Wipe with a soft, slightly damp cloth: Use plain water and a microfiber or soft cloth. Avoid abrasive pads that can dull the anti-slip texture.
- Clean the inner surface: Dust collects between the case and the shell. Wipe the inside and let the silicone air-dry completely before refitting.
- Skip harsh solvents: The supplied information does not confirm resistance to alcohol, bleach, or strong cleaners, so do not assume the silicone will tolerate them.
- Refit only when fully dry: Trapped moisture under silicone is harder to notice than a wet exterior. Dry both the case and the console shell first.
Delivery timing and what to expect
This is a customized accessory, and the catalog asks you to allow 7–10 days for delivery to be arranged. That lead time matters if you are buying the case as a gift or want it before a trip.
At USD 8.00 against a catalog comparison price of USD 15.99, the case is an inexpensive way to protect the RG35XX Plus. The package weighs 60g and arrives in a bag, so there is no hard travel case included. If you need drop protection for a backpack, pair the silicone cover with a separate pouch.
The supplied information does not confirm water resistance, screen protection, or compatibility with other Anbernic models. Treat it as a fitted silicone cover for the RG35XX Plus and nothing more.
