FENIX320 Landing Gear Panel: MSFS2020 Setup Guide
By LITNXT | Top Retro Handheld Game Console – litnxt | Published: 2026-11-03
Category: Gör-det-själv-guider
Connect and configure your 1:1 backlit landing gear and lights panel for MSFS2020 with FENIX320. Step-by-step setup, wiring tips, and common mistakes to avoid.
Quick answer
Connect the panel to a free USB port on your Windows PC, launch MSFS2020 with the FENIX320 loaded, and use the one-touch configuration to sync the gear lever and lights—no manual driver installation is required.
Why the FENIX320 panel is plug-and-play
The 1:1 scale panel is designed to work out of the box with MSFS2020 and Windows PC. Its one-touch configuration means you don't need to assign axes or buttons manually in the simulator settings. The auto brake and landing gear indicator lights synchronize automatically, so you can focus on flying rather than troubleshooting bindings.
What to check before you start
Make sure your PC meets MSFS2020 requirements and that the FENIX320 add-on is installed and updated. Confirm you have a free USB port and that Windows recognizes the device without errors. The panel does not include a power supply; it draws power from USB, so avoid unpowered hubs.
Step-by-step setup for your FENIX320 landing gear panel
- Connect the panel to your PC: Plug the panel's USB cable directly into a USB port on your Windows PC. Avoid using a USB hub if possible, as unpowered hubs can cause connection issues. Check Windows Device Manager to confirm the panel appears without warning icons.
- Launch MSFS2020 and load the FENIX320: Start Microsoft Flight Simulator 2020 and select the FENIX320 aircraft. Wait until the cockpit is fully loaded and the simulator is ready. Ensure the simulator is not paused and the aircraft systems are powered on.
- Trigger one-touch configuration: Press and hold the designated configuration button on the panel (refer to the manual) until the indicator lights flash. This initiates automatic detection and binding. If lights do not flash, try a different USB port or restart the simulator.
- Verify gear and lights synchronization: Move the landing gear lever up and down. The simulator's gear should animate, and the panel's indicator lights should match the gear state. Test the lights control switches similarly. If synchronization fails, close MSFS2020, disconnect the panel, and repeat from step 1.
- Test auto brake functionality: Engage the auto brake switch and observe the simulator's brake indicators. The panel's auto brake light should illuminate accordingly. Confirm that the auto brake light responds within one second of switch movement.
Product facts
- 1/1 Scale Backlit Landing Gear and Lights Control Panel for MSFS2020, Windows PC - Compatible with FENIX320: Authentic 1:1 scale design with precise layout and tactile feel. The true-to-life dimensions help you build muscle memory and make the transition from screen to hardware seamless.
1/1 Scale Backlit Landing Gear and Lights Control Panel for MSFS2020, Windows PC - Compatible with FENIX320 - 1/1 Scale Backlit Landing Gear and Lights Control Panel for MSFS2020, Windows PC - Compatible with FENIX320: Plug-and-play simplicity with one-touch configuration and no manual setup. You can skip complex driver or software configuration and start flying sooner.
- 1/1 Scale Backlit Landing Gear and Lights Control Panel for MSFS2020, Windows PC - Compatible with FENIX320: Auto brake and landing gear indicator lights synchronize with the simulator. You get immediate visual feedback that matches the aircraft state, reducing the risk of missed gear or brake actions.
